Low MOQ for Glass Bottle Cleaning Machine - TF-80 Tube Filling And Sealing Machine – Cmore
Low MOQ for Glass Bottle Cleaning Machine - TF-80 Tube Filling And Sealing Machine – Cmore Detail:
| Model | TF-80A | TF-80 |
| Hose Material | Metal tube, Aluminum tube | Plastic pipe, Composite pipe |
| Tube Diameter | Φ10- Φ32 | Φ10- Φ60 |
| Tube Length | 60-200（Customizable） | 60-200 (Customizable） |
| Capacity | 5-250ml/tubes/ Adjustable | 5-250ml/tubes/ Adjustable |
| Filling Accuracy | ≤±0.5% | ≤±0.5% |
| Speed（tubes/h） | 60-80 | 60-80 |
| Compressed Air | 0.55-0.65mpa | 0.55-0.65mpa |
| Power | 1.5kw(380V 50Hz) | 1.5kw(380V 50Hz) |
| Heat sealing power | 3.3kw | |
| Dimension（L*W*H/mm） | 2424×1000 ×2020 | 2424×1000×2020 |
| Weight（kgs） | 1500 | 1500 |
1. Reasonable structural design. This machine fully embodies the advanced, reliable and rational design concept required by GMP for pharmaceutical equipment, and reduces the human factors in the use process. The automatic feeding of the tube, automatic positioning of the tube color mark, filling, end-sealing, batch numbering, and exit of the finished product, adopt the linkage design, and all actions are completed synchronously.
2. Fully meet the requirements of the material for the filling process:
a. The machine is compact, the time from filling to end sealing is short, and it can complete complex end sealing forms.
b. To ensure that the filling process is not polluted, the material of the contact part of the machine and the material is all made of 316L stainless steel, and the contact surface is fully polished.
c. High filling precision, the machine adopts reliable piston type quantitative filling valve, the filling volume adjustment is convenient and reliable, and the filling precision is high.
d. The filling components are easy to disassemble, and the barrel valve body, piston injection head, etc. can be quickly disassembled, which is easy to clean, disinfect and sterilize.
e. When filling, the injection nozzle can extend into the tube, which can ensure effective injection and prevent the material from sticking to the wall of the aluminum tube and affecting the sealing.
f. An air blow-off device is installed, and the injection head adopts a combined blow-off and cut-off injection method to prevent the viscous material from pulling out the filament, which affects the sealing and filling volume.
3. Fully enclosed ball bearings are used in the operation part of the manipulator, and linear bearings and self-lubricating systems are used on the upper and lower sliding shafts of the machine table to avoid pollution.
4. The automatic filling and sealing machine adopts the frequency conversion stepless speed regulation system, and the working operation is controlled by coordinated linkage, which can obtain a higher production speed. The pneumatic control system is equipped with a precision filter and maintains a certain stable pressure.
5. Beautiful appearance, easy to clean. The machine is beautiful in appearance, polished and refined by stainless steel, compact in structure, easy to clean without dead ends, and fully complies with the GMP requirements of pharmaceutical production.
Product detail pictures:
Related Product Guide:
As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for Low MOQ for Glass Bottle Cleaning Machine - TF-80 Tube Filling And Sealing Machine – Cmore, The product will supply to all over the world, such as: America, Doha, Bandung, To have much more enterprise. ompanions, we've got updated the item list and seek for optimistic co-operation. Our web-site shows the latest and complete information and facts about our merchandise list and company. For further acknowledge, our consultant service group in Bulgaria will reply to all of the inquiries and complications immediately. They're about to make their finest effort to meet buyers need. Also we support the delivery of absolutely free samples. Business visits to our business in Bulgaria and factory are generally welcome for a win-win negotiation. Hope to expertise a happy company co-operation perform with you.
By Leona from USA - 2018.12.28 15:18
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
By Norma from Cyprus - 2018.09.29 17:23
